ThingsBoard CE v3.2.x Windows升级说明

• Upgrading ThingsBoard CE to 3.2.2
  • ThingsBoard package download
  • ThingsBoard service upgrade
  • Start the service
• Upgrading ThingsBoard CE to 3.2.1
  • ThingsBoard package download
  • ThingsBoard service upgrade
  • Start the service
• Upgrading ThingsBoard CE to 3.2
  • ThingsBoard package download
  • ThingsBoard service upgrade
  • Start the service

Upgrading ThingsBoard CE to 3.2.2

NOTE: These upgrade steps are applicable for ThingsBoard version 3.2.1. In order to upgrade to 3.2.2 you need to upgrade to 3.2.1 first.

NOTE: Since ThingsBoard version 3.2.2 Java 11 is used

• Please install Java 11 before proceeding upgrade procedure using the following guide:
  • Java 11 Installation on Windows

ThingsBoard package download

Download ThingsBoard installation archive for Windows: thingsboard-windows-3.2.2.zip.

ThingsBoard service upgrade

• Stop ThingsBoard service if it is running.

1
net stop thingsboard

• Make a backup of previous ThingsBoard configuration located in <ThingsBoard install dir>\conf (for ex. C:\thingsboard\conf).

• Remove ThingsBoard install dir.
• Unzip installation archive to ThingsBoard install dir.
• Compare your old ThingsBoard configuration files (from the backup you made in the first step) with new ones.
• Please make sure that you set database.ts.type parameter value (in the file <ThingsBoard install dir>\conf\thingsboard.yml) to “cassandra” instead of “sql” if you are using Cassandra database for timeseries data:

1
2
3
4
  database:
    ts_max_intervals: "${DATABASE_TS_MAX_INTERVALS:700}" # Max number of DB queries generated by single API call to fetch telemetry records
    ts:
      type: "${DATABASE_TS_TYPE:sql}" # cassandra, sql, or timescale (for hybrid mode, DATABASE_TS_TYPE value should be cassandra, or timescale)

• Finally, run upgrade.bat script to upgrade ThingsBoard to the new version.

NOTE Scripts listed above should be executed using Administrator Role.

Execute regular upgrade script:

1
C:\thingsboard>upgrade.bat --fromVersion=3.2.1

Start the service

若将 Redis 用于缓存，在启动 ThingsBoard 前需清空所有已存储的 key。

连接到您的 Redis 实例（或 container/pod，视部署方式而定），执行：

redis-cli flushall

注意：仅当 Redis 专门用于 ThingsBoard 时可使用此命令。若其他应用也使用 Redis，需定位 ThingsBoard 使用的数据库并仅清空该库。默认数据库 index 为 0，可通过 ThingsBoard 环境变量 REDIS_DB 配置。

redis-cli

select 0

flushdb

若将 Redis 用于缓存，在启动 ThingsBoard 前需清空所有已存储的 key。

连接到您的 Redis 实例（或 container/pod，视部署方式而定），执行：

redis-cli flushall

注意：仅当 Redis 专门用于 ThingsBoard 时可使用此命令。若其他应用也使用 Redis，需定位 ThingsBoard 使用的数据库并仅清空该库。默认数据库 index 为 0，可通过 ThingsBoard 环境变量 REDIS_DB 配置。

redis-cli

select 0

flushdb

1
net start thingsboard

Upgrading ThingsBoard CE to 3.2.1

NOTE: These upgrade steps are applicable for ThingsBoard version 3.2. In order to upgrade to 3.2.1 you need to upgrade to 3.2 first.

ThingsBoard package download

Download ThingsBoard installation archive for Windows: thingsboard-windows-3.2.1.zip.

ThingsBoard service upgrade

• Stop ThingsBoard service if it is running.

1
net stop thingsboard

• Make a backup of previous ThingsBoard configuration located in <ThingsBoard install dir>\conf (for ex. C:\thingsboard\conf).

• Remove ThingsBoard install dir.
• Unzip installation archive to ThingsBoard install dir.
• Compare your old ThingsBoard configuration files (from the backup you made in the first step) with new ones.
• Please make sure that you set database.ts.type parameter value (in the file <ThingsBoard install dir>\conf\thingsboard.yml) to “cassandra” instead of “sql” if you are using Cassandra database for timeseries data:

1
2
3
4
  database:
    ts_max_intervals: "${DATABASE_TS_MAX_INTERVALS:700}" # Max number of DB queries generated by single API call to fetch telemetry records
    ts:
      type: "${DATABASE_TS_TYPE:sql}" # cassandra, sql, or timescale (for hybrid mode, DATABASE_TS_TYPE value should be cassandra, or timescale)

• Finally, run upgrade.bat script to upgrade ThingsBoard to the new version.

NOTE Scripts listed above should be executed using Administrator Role.

Execute regular upgrade script:

1
C:\thingsboard>upgrade.bat --fromVersion=3.2.0

Start the service

若将 Redis 用于缓存，在启动 ThingsBoard 前需清空所有已存储的 key。

连接到您的 Redis 实例（或 container/pod，视部署方式而定），执行：

redis-cli flushall

注意：仅当 Redis 专门用于 ThingsBoard 时可使用此命令。若其他应用也使用 Redis，需定位 ThingsBoard 使用的数据库并仅清空该库。默认数据库 index 为 0，可通过 ThingsBoard 环境变量 REDIS_DB 配置。

redis-cli

select 0

flushdb

若将 Redis 用于缓存，在启动 ThingsBoard 前需清空所有已存储的 key。

连接到您的 Redis 实例（或 container/pod，视部署方式而定），执行：

redis-cli flushall

注意：仅当 Redis 专门用于 ThingsBoard 时可使用此命令。若其他应用也使用 Redis，需定位 ThingsBoard 使用的数据库并仅清空该库。默认数据库 index 为 0，可通过 ThingsBoard 环境变量 REDIS_DB 配置。

redis-cli

select 0

flushdb

1
net start thingsboard

Upgrading ThingsBoard CE to 3.2

NOTE: These upgrade steps are applicable for ThingsBoard version 3.1.1. In order to upgrade to 3.2 you need to upgrade to 3.1.1 first.

ThingsBoard package download

Download ThingsBoard installation archive for Windows: thingsboard-windows-3.2.zip.

ThingsBoard service upgrade

• Stop ThingsBoard service if it is running.

1
net stop thingsboard

• Make a backup of previous ThingsBoard configuration located in <ThingsBoard install dir>\conf (for ex. C:\thingsboard\conf).

• Remove ThingsBoard install dir.
• Unzip installation archive to ThingsBoard install dir.
• Compare your old ThingsBoard configuration files (from the backup you made in the first step) with new ones.
• Please make sure that you set database.ts.type parameter value (in the file <ThingsBoard install dir>\conf\thingsboard.yml) to “cassandra” instead of “sql” if you are using Cassandra database for timeseries data:

1
2
3
4
database:
  ts_max_intervals: "${DATABASE_TS_MAX_INTERVALS:700}" # Max number of DB queries generated by single API call to fetch telemetry records
  ts:
    type: "${DATABASE_TS_TYPE:sql}" # cassandra, sql, or timescale (for hybrid mode, DATABASE_TS_TYPE value should be cassandra, or timescale)

• Finally, run upgrade.bat script to upgrade ThingsBoard to the new version.

NOTE Scripts listed above should be executed using Administrator Role.

Execute regular upgrade script:

1
C:\thingsboard>upgrade.bat --fromVersion=3.1.1

Start the service

若将 Redis 用于缓存，在启动 ThingsBoard 前需清空所有已存储的 key。

连接到您的 Redis 实例（或 container/pod，视部署方式而定），执行：

redis-cli flushall

注意：仅当 Redis 专门用于 ThingsBoard 时可使用此命令。若其他应用也使用 Redis，需定位 ThingsBoard 使用的数据库并仅清空该库。默认数据库 index 为 0，可通过 ThingsBoard 环境变量 REDIS_DB 配置。

redis-cli

select 0

flushdb

若将 Redis 用于缓存，在启动 ThingsBoard 前需清空所有已存储的 key。

连接到您的 Redis 实例（或 container/pod，视部署方式而定），执行：

redis-cli flushall

注意：仅当 Redis 专门用于 ThingsBoard 时可使用此命令。若其他应用也使用 Redis，需定位 ThingsBoard 使用的数据库并仅清空该库。默认数据库 index 为 0，可通过 ThingsBoard 环境变量 REDIS_DB 配置。

redis-cli

select 0

flushdb

1
net start thingsboard